- Online only
![](https://shop.nthinking.com/160-large_default/miu288-lv-modem-dc-power.jpg)
To service the growing need for efficient, reliable data communication in a harsh environments of utility substations and industrial facilities, has developed a 28800bps modem that can operate from various AC/DC power supplies and survive high surge levels and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communications devices.
With the rapid move toward “Intelligent” substation, where meters, relay, RTU’s, SCADA systems, etc. are able to “talk” to a remote operator, communications devices such as modems are moving off the desktop and into the field, where the convenience of 115VAC power outlets and climate controls are usually hard to find.
Data Connect Enterprise has addressed this problem by developing the MIU28.8 series modem designed specifically for harsh environments.
The MIU28.8 series modem is a highly sophisticated full duplex, V.34 data modem that is designed to interface with RS232, RS485 (external device), 5V logic (TTL) or simple send and receive signals. The MIU28.8 series modem operates on dial-up system
The MIU28.8 series modem is powered from a unique power supply that enables it to operate on any AC or DC voltage ranging from 48V to 240V. A low voltage version (9-36VDC) is also available. The MIU28.8 modem is designed to work in temperatures from 40°C to 85°C, and is surge protected on both the power and analog lines.
The MIU28.8 series modem is bundled in a 5-3/8” x 1-3/8” non-metallic enclosure, suitable for desktop or wall mounting
Also see our Data Sheets on the MIUT/PowerPort low voltage modems, the “Myriad” Rack Mount Modem Banks, MIU202T (Bell), MIU14.4 and MIU9.6FPD modems
Modem Line Speeds:
Asynchronous 28800, 14400, 9600, 4800, 2400, 1200, 300bps
DTE Rates:
Above modem line speeds (IE; with data compression) 115.2, 57.6, 38.4, 19.4kbps
Transmission Line:
Dial
Compatibility:
Hayes Extended AT Command Set
Power Supply:
48VDC/DC to 220VAC/DC (Optional 9-36VDC)
Power Connector:
4-ft AC Cord wt 3-PIN Screw
Terminal connector included
Case Size:
5-3/8” x 4” x 1-3/8”
Digital Port:
RS232 with DB9 Connector
Analog Port:
RJ11 Modular Jack
Surge Protection:
(Power Line) 8kV [Exceeds IEC801-4] (20kV {IE801-5} available if required)
Environments
-40°C to 85°C, 0 to 95% humidity (non-condensing)
Certifications:
FCC Part 68, Industry Canada
DCE/MIU28.8 2-Wire Dial-Up Standalone
DCE/MIU28.8LV 2-Wire Dial-Up Standalone, 9-36VDC