• Online only

Hardened ethernet extender 2-pack

$1,145.00
Tax included
Hardened ethernet extender 2-pack
Quantity

The Data Connect DCE 2178HEE is a point-to-point Industrial Ethernet Extender designed to operate in harsh environments that efficiently extends 10/100 Ethernet circuits to over 300meters (984feet) at 50Mbps using existing cross-over pair copper wire.

The Data Connect 2178HEE functions at temperatures ranging from -40°C to 75°C (-40°F to 167°F) and is tested for functional operation @ -40°C to 85°C (-40°F to 185°F). The Data Connect 2178HEE will allow Ethernet connectivity in existing facilities without pulling extra cable.

This is the perfect solution to Ethernet on the factory floor where systems have been upgraded from slower serial communications to Ethernet networking. Installation is easy with a single switch setting, one end is set for local and the other remote. The Data Connect 2178HEE is used in pairs to extend Ethernet connectivity over existing voice grade copper wire

  • Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment

  • Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment

  • Operates transparent to higher layer protocols such as TCP/IP

  • Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX

  • Ethernet Extender(RJ-11 and Terminal Block) Port: Symmetrical on the VDSL, High-speed Full-duplex 50Mbps communications link over existing copper Telephone line

  • Support DIP switch to select Local or Remote side

  • Ten speeds with speed indicator LEDs on front panel of unit, Up to 50Mbps @ about 300meters (984ft.), Down to 1Mbps @ about 1,900meters (6,232ft.)

  • Redundant power inputs with Terminal Block and DC Jack

  • -40°C to 75°C (-40°F to 167°F) operating temperature range

  • Hardened aluminum case Supports DIN-Rail or Panel Mounting installation

Specifications

  • Standards: IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3x, Ethernet over VDSL

  • Protocols: Transparent to higher layer protocols

  • Processing Type: Half-duplex back-pressure and IEEE802.3x Full-duplex flow control

Power

  • Input: Input Voltage: 12 to 30VDC (Terminal Block);12VDC (DC Jack)

  • Power Consumption: 4.2W Max. 0.35A@12VDC, 0.175A@24VDC

  • Power Supply References:

    • Terminal Block: 12 to 24VDC, 1.5A

    • DC Jack: 12VDC, 3A

  • Overload Current Protection: Present

  • Reverse Polarity Protection: Present

Mechanical

  • Casing: Aluminum case

  • Dimensions: 50mm (W) x 110mm (D) x 135mm (H) (1.97″ (W) x 4.33″ (D) x 5.31″ (H))

  • Weight: 0.8Kg (1.76lbs.)

  • Installation: DIN-Rail, Panel Mounting

Interface

  • Ethernet Port:

    • Port: One RJ-45 port, 10/100Base-TX Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX

    • Speed: 10/100Mbps

    • Distance: 100meters (328ft.)

    • Cable:

      • 10Base-T: UTP CAT. 3, 4, 5 (2-pair wire)

      • 100Base-TX: UTP CAT. 5 (2-pair wire)

Ethernet Extender Port:

  • Port: One RJ-11 and Terminal Block port

  • Speed: 1/3/5/10/15/20/25/30/40/50Mbps

  • Distance: 1900meters (6,232ft.)

  • Cable: Telephone line 24 AWG (0.5mm diameter, 1-pair wire) or larger

DIP switch:

  • One DIP switch: Local (CO) or Remote (CPE)

LED Indicators:

  • Per Unit: Power Status (Power)

  • Per Port: 10/100TX: Link/Activity, Full-duplex

  • Line: Error, Link, Local, Remote

Environment

  • Operating Temperature: -40°C to 75°C (-40°F to 167°F)

  • Tested @ -40°C to 85°C (-40°F to 185°F)

  • Storage Temperature: -40°C to 85°C (-40°F to 185°F)

  • Ambient Relative Humidity: 5% to 95% (non-condensing)

Regulatory Approvals:

  • ISO: Manufactured in an ISO9001 facility

  • Safety: UL508, EN60950-1, IEC60950-1

  • EMI:

    • FCC Part 15, Class A

    • EN61000-6-3

      • EN55022

      • EN61000-3-2

      • EN61000-3-3

  • EMS:

    • EN61000-6-2

      • EN61000-4-2 (ESD Standards)

        • Contact: + / – 4KV; Criteria B

        • Air: + / – 8KV; Criteria B

      • EN61000-4-3 (Radiated RFI Standards)

        • 10V/m, 80 to 1000MHz; 80% AM Criteria A

      • EN61000-4-4 (Burst Standards)

        • Signal Ports: + / – 4KV; Criteria B

        • D.C. Power Ports: + / – 4KV; Criteria B

        • A.C. Power Ports: + / – 4KV; Criteria B

      • EN61000-4-5 (Surge Standards)

        • Signal Ports: + / – 1KV; Line-to-Line; Criteria B

        • D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B

        • A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B

      • EN61000-4-6 (Induced RFI Standards)

        • Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A

        • D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A

        • A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A

      • EN61000-4-8 (Magnetic Field Standards)

        • 30A/m @ 50, 60Hz; Criteria A

      • EN61000-4-11 (Voltage Dip Standards)

        • A.C. Power Ports: 30% Reduction for 0.5 period; Criteria B

  • Environmental Test Compliance:

    • IEC60068-2-6 Fc (Vibration Resistance)

      • 5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport)

    • IEC60068-2-27 Ea (Shock)

      • 25g @ 11ms (Half-Sine Shock Pulse; Operation)

      • 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)

    • IEC60068-2-32 Ed (Free Fall) 1M (3.281ft.)

  • NEMA TS1/2 Environmental requirements for Traffic control equipment

2178HEE-00B Hardened 10/100Base-TX Ethernet Extender Installation Type :DIN Rail (mounting kit is included)

Optional Panel mount kit, ordered separately, part number: KP-AA96-480

Optional Rack mount kit, ordered separately, part number: KR-BK43-400

Ordering Information

2178HEE 10/100Base-TX Industrial Hardened Ethernet Extender
2178HEE-2PK 10/100Base-TX Industrial Hardened Ethernet, 2PK
2178HEE-DIN DIN rail mount kit

DCE/2178HEE-2PK